Signal Distribution


GNSS (Global Navigation Satellite System) signal distribution involves amplifying, repeating, and distributing signals to various receivers, devices or across different locations. This distribution allows multiple devices to access GNSS signals from a single antenna, because of this it is often more cost-effective to distribute the signal as opposed to installing individual antennas for each device. Signal distribution is often used in applications where location or timing data is required but GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.


Step Global provides solutions for all your GNSS signal distribution requirements, we provide GNSS signal splitters with outputs ranging from 2-32, we also supply signal amplifiers, attenuators, combiners, filters, and repeaters. We also provide a range of products for UHF and RFID signal distribution. 

View:
Sort by: 

1 x 16 GNSS L1L2 COTS Ruggedized RackMount Splitter

Product Code: RRMS116

Brand: GPS Source

The RRMS116 Rugged Rack-Mount Splitter is a one-input, sixteen-output GPS L1/L2 signal divider that is 2U high and fits within a standard 19” rack. Typical use is where an input from a single active GPS roof antenna is split evenly between sixteen outputs. The RRMS116 is configured to work with a MIL-STD-704 or MIL-STD- 1275 compliant 28VDC Power Supply that will power the active GPS...



1 x 16 Integrated Rack Mount GNSS Splitter

Product Code: IRMS116

Brand: GPS Source

The IRMS116 single input, 16 output splitter amplifies and splits the GPS/GNSS signal from one GPS receive antenna while granting up to 16 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards. The dual power supply option allows two internal power supply units...



1 x 16 Rack Mount GNSS Splitter

Product Code: RMS116

Brand: GPS Source

The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.



1 x 2 GNSS Slimline Splitter

Product Code: S12S

Brand: GPS Source

The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...



1 x 2 GNSS Splitter

Product Code: S12

Brand: GPS Source

The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...



1 x 2 GNSS Tiny Splitter

Product Code: S12T

Brand: GPS Source

A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...



1 x 2 Millitary Qualified GNSS Splitter

Product Code: MS12

Brand: GPS Source

This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load...



1 x 32 Integrated Rack Mount GNSS Splitter

Product Code: IRMS132

Brand: GPS Source

The IRMS132 single input, 32 output splitter amplifies and the GPS/GNSS signal from one GPS receive antenna while granting up to 32 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to thirty-two receiving GPS units or timing boards. A GNSS receiver within the IRMS132 monitors the antenna signal strength....



1 x 32 Rack Mount GNSS Splitter

Product Code: RMS132

Brand: GPS Source

The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.



1 x 4 GNSS Splitter

Product Code: S14

Brand: GPS Source

A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...



1 x 4 GNSS Timing Splitter

Product Code: S14GT

Brand: GPS Source

Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...



1 x 4 Intelligent GNSS Splitter

Product Code: S14WI

Brand: GPS Source

The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...



1 x 4 Millitary Qualified GNSS Splitter

Product Code: MS14

Brand: GPS Source

This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5)...



1 x 4 Slimline GNSS Splitter

Product Code: S14S

Brand: GPS Source

The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass.  The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.



1 x 8 GNSS Splitter

Product Code: S18-A

Brand: GPS Source

A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S18-A GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.



1 x 8 GNSS Timing Splitter

Product Code: S18GT

Brand: GPS Source

The S18GT will support long-lasting, trouble free deployment in a small cell wireless and/or DAS environment. The device makes it possible to use a single GPS referencing antenna for synchronization systems, increasing capacity without increasing GPS antennas or cabling requirements.  Power is obtained from the GPS receiver(s) connected to the amplifier.  There is no need for a...



1 x 8 Integrated Rack Mount GNSS Splitter

Product Code: IRMS18

Brand: GPS Source

The IRMS18 single input, 8 output splitter amplifies and the GPS/GNSS signal from one GPS receive antenna while granting up to 8 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. A GNSS receiver within the IRMS132 monitors the antenna signal strength. There is...



1 x 8 Intelligent GNSS Splitter

Product Code: S18WI

Brand: GPS Source

The S18WI is designed to be ruggedized. The cost of multiple antennas and long cable runs is eliminated. The S18WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S18WI features an optional DC bias Pick & Choose circuit which allows for the active antenna DC input to be applied to any or all...



1 x 8 Millitary Qualified GNSS Splitter

Product Code: MS18

Brand: GPS Source

This is a military qualified MS18 GPS splitter with one-input and eight-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between eight receiving GPS units. The MS18 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3 thru J9)...



1 x 8 Rack Mount GNSS Splitter

Product Code: RMS18

Brand: GPS Source

The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.



1 x 8 Slimline GNSS Splitter

Product Code: S18S -A

Brand: GPS Source

The S18S GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.



2 x 16 Integrated Rack Mount GNSS Splitter

Product Code: IRMS216

Brand: GPS Source

The IRMS216 dual input, 16 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 16 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216 has...



2 x 32 Integrated Rack Mount GNSS Splitter

Product Code: IRMS232

Brand: GPS Source

The IRMS232 dual input, 32 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 32 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to thirty-two receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216...



2 x 8 Integrated Rack Mount GNSS Splitter

Product Code: IRMS28

Brand: GPS Source

The IRMS28 dual input, 8 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 8 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216 has the...



Items per page: