|
Step Global |
|---|
In telecommunications and networking, efficient data transmission is key to maintaining competitiveness and reliability. Fibre optic multiplexers also known as a mux combine multiple data signals onto a single fibre optic cable for transmission. They enable the simultaneous transmission of multiple data streams over a single fibre, effectively increasing the capacity and efficiency of fibre optic communication systems.
The aggregation of multiple data streams onto a single fibre optic cable maximises the utilisation of available bandwidth. This results in more efficient use of network resources and increased data throughput, ideal for high-capacity applications such as telecommunications networks and data centres. Beyond this reduction in the number of fibre cables required results in additional cost savings when expanding network capacity, especially in large-scale applications or long runs.
For expert guidance on implementing fibre optic multiplexers and enhancing your network infrastructure, contact Step Global today.
Product Code: BS-MX-110
Brand: BitStream
The BS-MX-110 is a Fibre optic Interface Multiplexer 8x I/O and 1/2x RS232/422/485 and overvoltage protection. The device was designed to withstand extreme environmental conditions, meeting the standards of PN-EN 60255-27: 2014 for data communication equipment, with guaranteed reliable operation in temperatures from -40° to + 70° C. The BS-MX-110 comes in multiple versions. There...
Product Code: CERES
Brand: BitStream
The CERES is a 1x E1 G.703 2048kbit/s fiber optic multiplexer with 4-port 100 Mb/s Ethernet switch. The device is intended for users with demand for packet traffic and classic voice connections. The device transports the stream of Ethernet frames and one E1 stream through the optical path with the use of two single-mode or multi-mode fibres. It is also possible to transmit one fibre at a time...
Product Code: RSMUX3
Brand: BitStream
The RSMUX3 from Bitstream is an optical multiplexer of 2x RS232/422/485 streams into fibre. Multiplexer allows connection of RS232/422/485 serial interfaces over fibre links with the maximum distance of 100km and provides complete isolation between devices and resistance to disturbance occurring along transmission path. Depending on the specific versions, device can be connected using multimode...
Product Code: RSMUX2
Brand: BitStream
The RSMUX2 from Bitstream is a multiplexer with four RS232/422/485 streams into fibre. The Multiplexer allows connection of RS232/422/485 serial interfaces over fibre links with the maximum distance of 100km and provides complete isolation between devices and resistance to disturbance occurring along transmission path. Devices with two optical interfaces can be connected to create point to...
Product Code: TYTAN-16E1
Brand: BitStream
TYTAN-8E1/16E1 from bitstream is a multiplexer of eight or sixteen E1 PDH channels, up to four Gbits/s Ethernet data streams and Ethernet management channel into an optical data stream for transport over fiber optic. Device is designed for clients with requirements for both classic TDM PDH channels and high speed Ethernet. Optical paths can be realized using one or two line SFP interfaces. The...
