RFID and Scanners

View:
Sort by: 

7 dBIc Forklift Antenna, RHCP, 1ft RG-58 Pigtail/SMA-male Connector, without mou

Product Code: PN7-915-PT-1C-BLK-12

Brand: Mobile Mark

These panel Ant can be used for either US RFID or ISM applications. They are designed to operate in close proximity to metal, which normally has a tendency to detune Ant. An optional Mounting Kit is available for Mounting the Antenna to forklifts, shelving gates or racks. The Antenna is available in either right-hand or left-hand circular polarity. (Please specify when ordering) Manufactured by...



7 dBIc Forklift Antenna, RHCP, Integral N female Connector, without mounting bra

Product Code: PN7-915-BLK

Brand: Mobile Mark

These panel Ant can be used for either US RFID or ISM applications. They are designed to operate in close proximity to metal, which normally has a tendency to detune Ant. An optional Mounting Kit is available for Mounting the Antenna to forklifts, shelving gates or racks. The Antenna is available in either right-hand or left-hand circular polarity. (Please specify when ordering) Manufactured by...



7 dBic HEAVY DUTY RFID Panel Antenna, RHCP, direct N-female (902-928 MHz)

Product Code: HD7-915RCP-BLK

Brand: Mobile Mark

The HD7-915 RFID panel Antenna is our most rugged Antenna designed to date for the RFID market. If you need a highly rugged Antenna for use in the harshest conditions, then this is the Antenna to choose. This rugged Antenna has surpassed every test thrown at it, including being run over by a car.



7 dBic HEAVY DUTY RFID Panel Antenna, RHCP, direct N-female, complete with Pole

Product Code: HD7-915RCP-PM-BLK

Brand: Mobile Mark

The HD7-915 RFID panel Antenna is our most rugged Antenna designed to date for the RFID market. If you need a highly rugged Antenna for use in the harshest conditions, then this is the Antenna to choose. This rugged Antenna has surpassed every test thrown at it, including being run over by a car.



7 dBic HEAVY DUTY RFID Panel Antenna, RHCP, direct REVERSE POLARIZED N-female (9

Product Code: HD7-915RCP-BLK-SP297

Brand: Mobile Mark

The HD7-915 RFID panel Antenna is our most rugged Antenna designed to date for the RFID market. If you need a highly rugged Antenna for use in the harshest conditions, then this is the Antenna to choose. This rugged Antenna has surpassed every test thrown at it, including being run over by a car.



8 dBic RFID Panel Antenna, RHCP, 305mm RG-58 with SMA-Male (902-928 MHz)

Product Code: PN8-915RCP-1C-GRY-12

Brand: Mobile Mark

This 8 dBic RFID Patch Ant is intended for mid-range or long-range coverage, such as in a warehouse setting. The Antenna offers 8 dBic gain with a beamwidth of 70-degrees elevation and 70-degrees azimuth. The rugged radome makes it well suited for industrial applications. The Antenna is pipe mounted with a rugged L-Bracket and U-Bolt Mounting Kit.



AdvanMux-16, 16 port advanced RFID UHF multiplexer

Product Code: ADMX-16-e-130

Brand: Keonn

AdvanMux-16 is a high performance 16 port multiplexer that expands by a factor 16 the number of antennas that can be connected to each port of an RFID reader. AdvanMux-16 is compatible with most RFID reader models in the market, including Keonn, Impinj, Zebra, Alien, ThingMagic and others. The AdvanMux-16 reduces the cost associated with large scale RFID systems by minimising the amount of...



AdvanMux-4 ,4 port RFID UHF multiplexer

Product Code: ADMX-4-e-130

Brand: Keonn

AdvanMux-4 is a high performance 4 port multiplexer that expands by a factor 4 the number of antennas that can be connected to each port of an RFID reader. AdvanMux-4 is compatible with most RFID reader models in the market, including Keonn, Impinj, Zebra, Alien, ThingMagic and others. AdvanMux-4 is connected to the I/O port of most reader models, and it is controlled by sending simple...



AdvanMux-8, 8 port RFID UHF multiplexer

Product Code: ADMX-8-e-130

Brand: Keonn

AdvanMux-8 is a high performance 8 port multiplexer that expands by a factor 8 the number of antennas that can be connected to each port of an RFID reader. AdvanMux-8 is compatible with most RFID reader models in the market, including Keonn, Impinj, Zebra, Alien, ThingMagic and others. The AdvanMux-8 reduces the cost associated with RFID systems by minimising the amount of readers required for...



AdvanReader-10 USB RFID reader

Product Code: ADRD-m1-US-10

Brand: Keonn

AdvanReader-10 is a small form factor, lightweight, high performance USB reader with an integrated antenna (optional). AdvanReader-10 is perfect for IoT applications and other embedded uses where a controller hardware already exists. The AdvanReader-10 reduces the time and cost associated with developing an RFID system and can be used in applications such as: Access control, Android based...



Advanreader-160 High performance RFID UHF reader

Product Code: ADRD-M4-ESMA-160

Brand: Keonn

AdvanReader-160 is a high power (31.5 dBm), four port, high performance UHF reader with an on-board microcomputer and a fully open Linux operating system. Thanks to its on-board microcomputer, AdvanReader-160 can work stand-alone, without needing to be connected to an external computer, thereby reducing equipment costs, installation costs, and maintenance costs. AdvanReader-160 is prepared to...



AdvanReader-70, Flexible RFID UHF reader

Product Code: ADRD-M1-ESMA-70

Brand: Keonn

AdvanReader-70 RFID UFH reader AdvanReader-70 is a flexible UHF reader with an on-board microcomputer and a fully open Linux operating system. It can be used in applications such as smart surfaces, RFID portals and Tunnels, RFID Point of Sales and loss prevention. Thanks to its on-board microcomputer, AdvanReader-70 can work stand-alone, without needing to be connected to an external...



AdvanReader-70A, High performance confined reading area

Product Code: ADRD-M1-CP11-US-70

Brand: Keonn

AdvanReader-70A is a high-performance, high-flexibility reader with integrated antenna ideal for check-in / check-out applications of items, people and assets. AdvanReader-70A has high output power (27 dBm) and high sensitivity and its confined beam antenna allows to control very well the reading area, even with far field tags, avoiding in this way stray reads. AdvanReader-70A has an on-board...



AdvanSplitter-2, RFID UHF power splitter

Product Code: ADSP-2-ESMA-110

Brand: Keonn

AdvanSplitter-2 is a high performance two port power splitter designed for RFID UHF applications. AdvanSplitter-2 can combine different Keonn antennas in new ways, creating new antennas with longer read range and narrower beamwidth. Some examples of antenna combinations are the following: Two Advantenna-p11 can be connected to AdvanSplitter to create an antenna array of 1 x 2 elements Two...



AdvanSplitter-4, 4 port RFID UHF power splitter

Product Code: ADSP-4-ESMA-110

Brand: Keonn

AdvanSplitter-4 is a high performance four port power splitter designed for RFID UHF applications. AdvanSplitter-4 is ideal for systems where reading speed is critical and tag location is not determinant. AdvanSplitter-4 can feed up to 4 antennas simultaneously in order to scan an area much faster than using multiplexers. AdvanSplitter-4 can also combine different Keonn antennas in new ways,...



AdvanSplitter-8, 8 port RFID UHF power splitter

Product Code: ADSP-8-ESMA-110

Brand: Keonn

AdvanSplitter-8 is a high performance eight port power splitter designed for RFID UHF applications. AdvanSplitter-8 is ideal for systems where reading speed is critical and tag location is not determinant. AdvanSplitter-8 can feed up to 8 antennas simultaneously in order to scan an area much faster than using multiplexers. AdvanSplitter-8 can also combine different Keonn antennas in new ways,...



Advantenna-CP11, RFID UHF confined field antenna

Product Code: ADAN-CP11US-EMSMA-200

Brand: Keonn

Advantenna-CP11 is a compact RFID UHF Antenna, with a highly controlled reading area, and with circular polarization. By controlling the power of the RFID reader, the Advantenna-CP11 can work as a near-field antenna, or as a wider range antenna. When working as a near-field antenna, the reading area can be adjusted to be a few centimetres, even with far-field tags. Advantenna–CP11 can...



Advantenna-L11, RFID UHF Near Field Antenna

Product Code: ADAN-L11DB-FLSMA-100

Brand: Keonn

Advantenna-L11 is a compact near-field RFID UHF Antenna, with a very thin form factor, and strong and even magnetic field distribution within its detection zone. When used with inductive near-field tags the reading area can be confined to the vicinity of the antenna. This thin form factor and the wide coverage area in the near-field zone of the antenna make this antenna ideal for many RFID...



Advantenna-p11, RFID UHF Wide Beam Antenna

Product Code: ADAN-p11US-FRSMA-200

Brand: Keonn

Advantenna-p11 from Keonn is a compact, cost effective RFID UHF patch antenna, with a very thin form factor, circular polarization and a radiation pattern characterized by a wide beam in all directions in one hemisphere. This radiation pattern and its thin form factor make this antenna ideal for many RFID applications such as smart shelves, smart displays, smart panels and smart tables or...



Advantenna-p12, 2 Element RFID UHF Fan Beam Antenna

Product Code: ADAN-p12US-FRSMA-200

Brand: Keonn

Advantenna-p12 from Keonn is a compact, cost effective RFID UHF 2 elements patch antenna with circular polarization and a radiation pattern characterized by a 60° beam width in the direction of the antenna long edge and 90° in the direction of the antenna short edge. Advantenna-p12 has a very thin form factor. This allows to integrate the antenna inside thin objects. Advantenna-p12 is...



Advantenna-p13, 3 Element RFID UHF Fan Beam Antenna

Product Code: ADAN-p13US-FRSMA-200

Brand: Keonn

Advantenna-p13 from Keonn is a compact, cost effective RFID UHF 3 elements patch antenna with circular polarization and a radiation pattern characterized by a 40° beam width in the direction of the antenna long edge and 90º in the direction of the antenna short edge. This radiation pattern makes this antenna ideal for many RFID applications such as: Loss prevention systems Portals,...



Advantenna-p14, 4 Element RFID UHF Fan Beam Antenna

Product Code: ADAN-p14US-FRSMA-200

Brand: Keonn

Advantenna-p14 from Keonn is a compact, cost effective RFID UHF 4 elements patch antenna with circular polarization and a radiation pattern characterized by a 30° beam width in the direction of the antenna long edge and 90º in the direction of the antenna short edge. This radiation pattern makes this antenna ideal for many RFID applications such as: Loss prevention systems Portals,...



Advantenna-p16, 6 Element RFID UHF Fan Beam Antenna

Product Code: ADAN-p16US-FRSMA-200

Brand: Keonn

Advantenna-p16 from Keonn is a compact RFID UHF 6 elements patch antenna with circular polarization and a radiation pattern characterized by a 20° beam width in the direction of the antenna long edge and 90º in the direction of the antenna short edge. This radiation pattern makes this antenna ideal for many RFID applications such as: Time keeping of sport events, marathons, race...



Advantenna-p22, RFID UHF Pencil Beam Antenna

Product Code: ADAN-p22US-FR270SMA-200

Brand: Keonn

Advantenna-p22 from Keonn is a compact RFID UHF 2x2 elements patch antenna with circular polarization and a radiation pattern characterized by a 60°/60° beamwidth. This radiation pattern makes this antenna ideal for many RFID applications such as real-time inventory systems, magic mirrors and tracking through doors and corridors.   The Advantenna-p22 comes in a variety of...



Items per page: