|
Step Global |
---|
GPS (Global Positioning System) and GNSS (Global Navigation Satellite System) signal distribution plays a crucial role in various industries, offering precise location and timing information for navigation, tracking, and timing synchronisation. GPS and GNSS signal distribution involves the transmission and dissemination of GPS signals to multiple receivers or users from a single source. This process ensures that GPS-enabled devices, such as smartphones, vehicles, and infrastructure, can access accurate positioning and timing data.
GPS and GNSS signal distribution can be achieved through the use of signal splitters, amplifiers, attenuators, combiners, filters, and repeaters. Signal distribution is commonly used in applications where location or timing data is required but access to GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.
Product Code: IRMS28
Brand: GPS Source
The IRMS28 dual input, 8 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 8 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216 has the...
Product Code: DC Block
Brand: GPS Source
Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the DCB conveniently blocks the antenna bias DC voltages in applications where the DC antenna voltage is not required or is provided by another source.
Product Code: C21
Brand: GPS Source
The C21 GPS Combiner is a two-input, one-output GPS device. This product typically finds application where two inputs from active GPS antennas are combined evenly into a single receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports.
Product Code: AT11
Brand: GPS Source
The AT11 GPS fixed attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 fixed attenuators provide a user-specified attenuation from 1 to 25dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: AT11M
Brand: GPS Source
The AT11M GPS fixed attenuator in mini housing is a one input one output RF device in a small form factor. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11M fixed attenuators provide a user-specified attenuation from 2 to 25dB. The AT11M also includes the option to pass the receive antenna LNA DC...
Product Code: AT11T
Brand: GPS Source
The AT11T GPS Fixed Attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 Fixed Attenuators provide a user-specified attenuation from 2 to 40dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: BT1
Brand: GPS Source
The GPS Bias Tee is used to supply DC voltage to the center conductor of a coaxial cable. The bias tee is used to provide power to antennas, amplifiers and other RF networked devices. It is available with a built-in regulated power supply allowing users to use standard AC power or unregulated coarse power supplies to create a set voltage with very low noise and ripple. Passes GPS, Galileo...
Product Code: A11
Brand: GPS Source
The A11 GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 is available with more options than any competitive product on the market. The A11 features 30dB of Gain, and a noise figure of less than 1.8dB. It can be powered externally with an AC input...
Product Code: A11M
Brand: GPS Source
The A11M GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device in a smaller form factor. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11M is available with more options than any competitive product on the market.
Product Code: A11T
Brand: GPS Source
The tiny A11T GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The A11T amplifier comes in a small, light housing. Dimensions of the tiny housing are 3.25 inches x 1 inch x .5 inches. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 product line comes available with more options than any...
Product Code: A114M
Brand: GPS Source
Designed with thin link margins of satellite navigation systems in mind, the A114M amplifier is a single stage gain block in a small form factor that covers the GPS, Galileo, and GLONASS frequencies. The device features 40dB gain and a noise figure less than 2dB. Since the product consumes less than 20mA, the device can be placed in line with the receiver antenna and can be powered by the GPS...
Product Code: A114T
Brand: GPS Source
The A114T amplifier is a single stage gain block in a small form factor that covers the GPS, Galileo, and GLONASS frequencies. The device features 40dB gain and a noise figure less than 2dB. Since the product consumes less than 20mA, the device can be placed in line with the receiver antenna and can be powered by the GPS receiver's antenna voltage output. The A114T may also be selected with the...
Product Code: GPSRKL12G
Brand: GPS Source
The GPSRKL12G repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the...
Product Code: METRO-G-RK
Brand: GPS Source
The METRO-G-RK is a complete GNSS amplifier system that includes: METRO-G, GNSS active antenna, GNSS passive antenna, swivel mount, pole mount, surge suppressor and cabling. The METRO-G is a GNSS smart amplifier, perfect for the commercial and public sector. When used in conjunction with an active GPS/GLONASS receive antenna, it will pass GPS+GLONASS signals inside a building, hangar or any...
Product Code: G-SP2/AN-DCI-5
Brand: Global Invacom
The Global Professional GPS ACTIVE 2 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers. The unit is configured to insert 5V DC to the antenna port via a DC regulator. Both output ports incorporate a 200 Ohm DC load to simulate an antenna DC Current draw. DC is blocked to both output ports.
Product Code: G-SP4/AN-DCI-6
Brand: Global Invacom
The Global Professional GPS ACTIVE 4 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers. The unit is configured to insert 5V DC to the antenna port via a DC regulator. Both output ports incorporate a 200 Ohm DC load to simulate an antenna DC Current draw. DC is blocked to both output ports.
Product Code: G-SP8/AN-DCI-7
Brand: Global Invacom
The Global Professional GPS ACTIVE 8 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers. The unit is configured to insert 5V DC to the antenna port via a DC regulator. Both output ports incorporate a 200 Ohm DC load to simulate an antenna DC Current draw. DC is blocked to both output ports.
Product Code: GPS FIBRE LINK
Brand: Global Invacom
The Global Professional GPS Fibre Link system enables the use of a remote or distant GPS antenna over very long cable runs at minimal signal loss. Minimal Loss over long Cable Runs Secure and Interference free link through "Noisy" environment 5V DC Feed to Antenna 1U Rackmount unit for direct interface to time server.
Product Code: L1FM-HR
Brand: GPS Source
The L1FM-HR GPS Filter is an in-line one input one output RF device. Designed with the thin link margins of satellite navigation systems in mind, the L1FM-HR features excellent side-band rejection with an insertion loss of less than 2.2dB. The L1FM-HR is only available with high rejection.
Product Code: L1FT-HR
Brand: GPS Source
The L1FT-HR GPS Filter is an in-line one input one output RF device. Designed with the thin link margins of satellite navigation systems in mind, the L1FM features excellent side band rejection with an insertion loss of less than 2.2dB. The L1FT-HR is available with more options than any competitive product in the market.
Product Code: GPSRKL1
Brand: GPS Source
The GPSRKL1 repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL1 is available with more customizable options than any competitive...
Product Code: L12F-HR
Brand: GPS Source
The L12F GPS L1/L2 Bandpass Filter is an in-line one input one output RF device. Designed with thin link margins of satellite navigation systems in mind the L12F features excellent side-band rejection with an insertion loss less than 5.5 dB. The L12F-HR is only available with high rejection for the L1 band and standard rejection for L2.
Product Code: GPSRKL12
Brand: GPS Source
The GPSRKL12 repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12 is available with more options than any competitive product in the...
Product Code: L-SP2/AN-DC1
Brand: Global Invacom
The Global Professional L BAND ACTIVE 2 way Splitter has been designed to split the L band from a typical satellite system with negligible insertion loss. Port one will allow DC to pass through from receiver through to the combined input port. The other port is DC blocked. The unit can be powered via port one or alternatively external powering is available. PSU’s are available if required.