|
Step Global |
|---|
GPS (Global Positioning System) and GNSS (Global Navigation Satellite System) signal distribution plays a crucial role in various industries, offering precise location and timing information for navigation, tracking, and timing synchronisation. GPS and GNSS signal distribution involves the transmission and dissemination of GPS signals to multiple receivers or users from a single source. This process ensures that GPS-enabled devices, such as smartphones, vehicles, and infrastructure, can access accurate positioning and timing data.
GPS and GNSS signal distribution can be achieved through the use of signal splitters, amplifiers, attenuators, combiners, filters, and repeaters. Signal distribution is commonly used in applications where location or timing data is required but access to GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: MS12
Brand: GPS Source
This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load...
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: S14GT
Brand: GPS Source
Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...
Product Code: S14WI
Brand: GPS Source
The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...
Product Code: MS14
Brand: GPS Source
This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5)...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: S18-A
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S18-A GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: S18GT
Brand: GPS Source
The S18GT will support long-lasting, trouble free deployment in a small cell wireless and/or DAS environment. The device makes it possible to use a single GPS referencing antenna for synchronization systems, increasing capacity without increasing GPS antennas or cabling requirements. Power is obtained from the GPS receiver(s) connected to the amplifier. There is no need for a...
Product Code: S18WI
Brand: GPS Source
The S18WI is designed to be ruggedized. The cost of multiple antennas and long cable runs is eliminated. The S18WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S18WI features an optional DC bias Pick & Choose circuit which allows for the active antenna DC input to be applied to any or all...
Product Code: MS18
Brand: GPS Source
This is a military qualified MS18 GPS splitter with one-input and eight-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between eight receiving GPS units. The MS18 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3 thru J9)...
Product Code: S18S -A
Brand: GPS Source
The S18S GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: C21
Brand: GPS Source
The C21 GPS Combiner is a two-input, one-output GPS device. This product typically finds application where two inputs from active GPS antennas are combined evenly into a single receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports.
Product Code: AT11
Brand: GPS Source
The AT11 GPS fixed attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 fixed attenuators provide a user-specified attenuation from 1 to 25dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: AT11T
Brand: GPS Source
The AT11T GPS Fixed Attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 Fixed Attenuators provide a user-specified attenuation from 2 to 40dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: BT1
Brand: GPS Source
The GPS Bias Tee is used to supply DC voltage to the center conductor of a coaxial cable. The bias tee is used to provide power to antennas, amplifiers and other RF networked devices. It is available with a built-in regulated power supply allowing users to use standard AC power or unregulated coarse power supplies to create a set voltage with very low noise and ripple. Passes GPS, Galileo...
Product Code: GPSRKL12G
Brand: GPS Source
The GPSRKL12G repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12G is available with more options than any competitive product in the...
Product Code: L1FT-HR
Brand: GPS Source
The L1FT-HR GPS Filter is an in-line one input one output RF device. Designed with the thin link margins of satellite navigation systems in mind, the L1FM features excellent side band rejection with an insertion loss of less than 2.2dB. The L1FT-HR is available with more options than any competitive product in the market.
Product Code: GPSRKL1
Brand: GPS Source
The GPSRKL1 repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL1 is available with more customizable options than any competitive...
Product Code: L12F-HR
Brand: GPS Source
The L12F GPS L1/L2 Bandpass Filter is an in-line one input one output RF device. Designed with thin link margins of satellite navigation systems in mind the L12F features excellent side-band rejection with an insertion loss less than 5.5 dB. The L12F-HR is only available with high rejection for the L1 band and standard rejection for L2.
Product Code: GPSRKL12
Brand: GPS Source
The GPSRKL12 repeater assembly is a low power GPS frequency repeater for areas where the GPS signal is not present. The GPS position is of the active outdoor antenna and therefore is not used for location and/or navigation. The repeated GPS signal is used for system test, initialization, and product demonstration. The GPSRKL12 is available with more options than any competitive product in the...
Product Code: AT11V
Brand: GPS Source
The AT11V GPS variable attenuator is a one input one output RF device. The most common use being the input level to a GPS receiver or a GPS test set is controlled via a potentiometer using an external knob. The AT11V is available with more options than any competitive product in the GPS Market. Ports pass DC voltage to the antenna 50" impedance on both ports Customer can choose to block DC...
