|
Step Global |
|---|
GNSS and GPS splitters facilitate the distribution of GPS signals to multiple receivers for enhanced navigation, tracking, and timing synchronisation. From optimising network performance to improving location-based services, GPS splitters offer a range of benefits making them indispensable in modern business operations.
GNSS and GPS splitters feature multiple output ports, Step Global provides a range of splitters with outputs ranging from 2 – 32. Splitters commonly amplify the split signal in order to compensate for any signal losses or degradation that may have occurred during the process but this is not always required.
If you have any questions on how to meet your signal requirements, you can get in contact with an expert here:
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: MS12
Brand: GPS Source
This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load...
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: S14GT
Brand: GPS Source
Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...
Product Code: S14WI
Brand: GPS Source
The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...
Product Code: MS14
Brand: GPS Source
This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5)...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: S18-A
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S18-A GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: S18GT
Brand: GPS Source
The S18GT will support long-lasting, trouble free deployment in a small cell wireless and/or DAS environment. The device makes it possible to use a single GPS referencing antenna for synchronization systems, increasing capacity without increasing GPS antennas or cabling requirements. Power is obtained from the GPS receiver(s) connected to the amplifier. There is no need for a...
Product Code: S18WI
Brand: GPS Source
The S18WI is designed to be ruggedized. The cost of multiple antennas and long cable runs is eliminated. The S18WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S18WI features an optional DC bias Pick & Choose circuit which allows for the active antenna DC input to be applied to any or all...
Product Code: MS18
Brand: GPS Source
This is a military qualified MS18 GPS splitter with one-input and eight-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between eight receiving GPS units. The MS18 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3 thru J9)...
Product Code: S18S -A
Brand: GPS Source
The S18S GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
