|
Step Global |
|---|
GNSS (Global Navigation Satellite System) signal distribution involves amplifying, repeating, and distributing signals to various receivers, devices or across different locations. This distribution allows multiple devices to access GNSS signals from a single antenna, because of this it is often more cost-effective to distribute the signal as opposed to installing individual antennas for each device. Signal distribution is often used in applications where location or timing data is required but GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.
Step Global provides solutions for all your GNSS signal distribution requirements, we provide GNSS signal splitters with outputs ranging from 2-32, we also supply signal amplifiers, attenuators, combiners, filters, and repeaters. We also provide a range of products for UHF and RFID signal distribution.
Product Code: RRMS116
Brand: GPS Source
The RRMS116 Rugged Rack-Mount Splitter is a one-input, sixteen-output GPS L1/L2 signal divider that is 2U high and fits within a standard 19” rack. Typical use is where an input from a single active GPS roof antenna is split evenly between sixteen outputs. The RRMS116 is configured to work with a MIL-STD-704 or MIL-STD- 1275 compliant 28VDC Power Supply that will power the active GPS...
Product Code: RMS116
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: RMS132
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: S14GT
Brand: GPS Source
Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...
Product Code: S14WI
Brand: GPS Source
The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: S18-A
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S18-A GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: S18GT
Brand: GPS Source
The S18GT will support long-lasting, trouble free deployment in a small cell wireless and/or DAS environment. The device makes it possible to use a single GPS referencing antenna for synchronization systems, increasing capacity without increasing GPS antennas or cabling requirements. Power is obtained from the GPS receiver(s) connected to the amplifier. There is no need for a...
Product Code: S18WI
Brand: GPS Source
The S18WI is designed to be ruggedized. The cost of multiple antennas and long cable runs is eliminated. The S18WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S18WI features an optional DC bias Pick & Choose circuit which allows for the active antenna DC input to be applied to any or all...
Product Code: RMS18
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S18S -A
Brand: GPS Source
The S18S GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: DC Block
Brand: GPS Source
Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the DCB conveniently blocks the antenna bias DC voltages in applications where the DC antenna voltage is not required or is provided by another source.
Product Code: C21
Brand: GPS Source
The C21 GPS Combiner is a two-input, one-output GPS device. This product typically finds application where two inputs from active GPS antennas are combined evenly into a single receiving GPS unit. In this scenario, the C21 will pass DC from the RF output to both antenna input ports (J1 & J2) in order to power the active GPS antennas on those ports.
Product Code: AT11
Brand: GPS Source
The AT11 GPS fixed attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 fixed attenuators provide a user-specified attenuation from 1 to 25dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: AT11M
Brand: GPS Source
The AT11M GPS fixed attenuator in mini housing is a one input one output RF device in a small form factor. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11M fixed attenuators provide a user-specified attenuation from 2 to 25dB. The AT11M also includes the option to pass the receive antenna LNA DC...
Product Code: AT11T
Brand: GPS Source
The AT11T GPS Fixed Attenuator is a one input one output RF device. Designed specifically for use in all L-Band channels of Global Navigation Satellite Systems, including GPS, Galileo, GLONASS, and QZSS, the AT11 Fixed Attenuators provide a user-specified attenuation from 2 to 40dB. The AT11 also includes the option to pass the receive antenna LNA DC bias voltage through the device or to block...
Product Code: BT1
Brand: GPS Source
The GPS Bias Tee is used to supply DC voltage to the center conductor of a coaxial cable. The bias tee is used to provide power to antennas, amplifiers and other RF networked devices. It is available with a built-in regulated power supply allowing users to use standard AC power or unregulated coarse power supplies to create a set voltage with very low noise and ripple. Passes GPS, Galileo...
Product Code: A11
Brand: GPS Source
The A11 GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 is available with more options than any competitive product on the market. The A11 features 30dB of Gain, and a noise figure of less than 1.8dB. It can be powered externally with an AC input...
Product Code: A11M
Brand: GPS Source
The A11M GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device in a smaller form factor. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11M is available with more options than any competitive product on the market.
Product Code: A11T
Brand: GPS Source
The tiny A11T GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The A11T amplifier comes in a small, light housing. Dimensions of the tiny housing are 3.25 inches x 1 inch x .5 inches. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 product line comes available with more options than any...
