|
Step Global |
|---|
GNSS (Global Navigation Satellite System) signal distribution involves amplifying, repeating, and distributing signals to various receivers, devices or across different locations. This distribution allows multiple devices to access GNSS signals from a single antenna, because of this it is often more cost-effective to distribute the signal as opposed to installing individual antennas for each device. Signal distribution is often used in applications where location or timing data is required but GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.
Step Global provides solutions for all your GNSS signal distribution requirements, we provide GNSS signal splitters with outputs ranging from 2-32, we also supply signal amplifiers, attenuators, combiners, filters, and repeaters. We also provide a range of products for UHF and RFID signal distribution.
Product Code: RRMS116
Brand: GPS Source
The RRMS116 Rugged Rack-Mount Splitter is a one-input, sixteen-output GPS L1/L2 signal divider that is 2U high and fits within a standard 19” rack. Typical use is where an input from a single active GPS roof antenna is split evenly between sixteen outputs. The RRMS116 is configured to work with a MIL-STD-704 or MIL-STD- 1275 compliant 28VDC Power Supply that will power the active GPS...
Product Code: IRMS116
Brand: GPS Source
The IRMS116 single input, 16 output splitter amplifies and splits the GPS/GNSS signal from one GPS receive antenna while granting up to 16 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards. The dual power supply option allows two internal power supply units...
Product Code: RMS116
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: IRMS132
Brand: GPS Source
The IRMS132 single input, 32 output splitter amplifies and the GPS/GNSS signal from one GPS receive antenna while granting up to 32 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to thirty-two receiving GPS units or timing boards. A GNSS receiver within the IRMS132 monitors the antenna signal strength....
Product Code: RMS132
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: S14GT
Brand: GPS Source
Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...
Product Code: S14WI
Brand: GPS Source
The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: S18-A
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S18-A GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: S18GT
Brand: GPS Source
The S18GT will support long-lasting, trouble free deployment in a small cell wireless and/or DAS environment. The device makes it possible to use a single GPS referencing antenna for synchronization systems, increasing capacity without increasing GPS antennas or cabling requirements. Power is obtained from the GPS receiver(s) connected to the amplifier. There is no need for a...
Product Code: IRMS18
Brand: GPS Source
The IRMS18 single input, 8 output splitter amplifies and the GPS/GNSS signal from one GPS receive antenna while granting up to 8 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. A GNSS receiver within the IRMS132 monitors the antenna signal strength. There is...
Product Code: S18WI
Brand: GPS Source
The S18WI is designed to be ruggedized. The cost of multiple antennas and long cable runs is eliminated. The S18WI can be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S18WI features an optional DC bias Pick & Choose circuit which allows for the active antenna DC input to be applied to any or all...
Product Code: RMS18
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S18S -A
Brand: GPS Source
The S18S GPS, Galileo, GLONASS Splitter is a one input eight output RF device. The most common application is where the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units. The S18 is available with more customizable options than any competitive product on the market.
Product Code: IRMS216
Brand: GPS Source
The IRMS216 dual input, 16 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 16 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216 has...
Product Code: IRMS232
Brand: GPS Source
The IRMS232 dual input, 32 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 32 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to thirty-two receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216...
Product Code: IRMS28
Brand: GPS Source
The IRMS28 dual input, 8 output splitter amplifies and the GPS/GNSS signal from two GPS receive antennas while granting up to 8 GPS/GNSS receivers signal access at any time. The most common use being the input from an active GPS roof antenna or GPS simulator is split to eight receiving GPS units or timing boards. Redundancy is built into the unit with dual antenna inputs. The IRMS216 has the...
Product Code: A11
Brand: GPS Source
The A11 GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 is available with more options than any competitive product on the market. The A11 features 30dB of Gain, and a noise figure of less than 1.8dB. It can be powered externally with an AC input...
Product Code: A11M
Brand: GPS Source
The A11M GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device in a smaller form factor. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11M is available with more options than any competitive product on the market.
Product Code: A11T
Brand: GPS Source
The tiny A11T GPS, Galileo, GLONASS Amplifier is an in-line one input one output RF device. The A11T amplifier comes in a small, light housing. Dimensions of the tiny housing are 3.25 inches x 1 inch x .5 inches. The most common use being the amplification of the GPS signal before 15dB of cable or other RF device loss. The A11 product line comes available with more options than any...
