|
Step Global |
|---|
GPS (Global Positioning System) and GNSS (Global Navigation Satellite System) signal distribution plays a crucial role in various industries, offering precise location and timing information for navigation, tracking, and timing synchronisation. GPS and GNSS signal distribution involves the transmission and dissemination of GPS signals to multiple receivers or users from a single source. This process ensures that GPS-enabled devices, such as smartphones, vehicles, and infrastructure, can access accurate positioning and timing data.
GPS and GNSS signal distribution can be achieved through the use of signal splitters, amplifiers, attenuators, combiners, filters, and repeaters. Signal distribution is commonly used in applications where location or timing data is required but access to GNSS signals are limited or obstructed. This signal obstruction can occur in urban environments such as cities where large buildings make accessing satellite signals challenging.
Product Code: RRMS116
Brand: GPS Source
The RRMS116 Rugged Rack-Mount Splitter is a one-input, sixteen-output GPS L1/L2 signal divider that is 2U high and fits within a standard 19” rack. Typical use is where an input from a single active GPS roof antenna is split evenly between sixteen outputs. The RRMS116 is configured to work with a MIL-STD-704 or MIL-STD- 1275 compliant 28VDC Power Supply that will power the active GPS...
Product Code: RMS116
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: MS12
Brand: GPS Source
This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load...
Product Code: RMS132
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: MS14
Brand: GPS Source
This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5)...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: MS18
Brand: GPS Source
This is a military qualified MS18 GPS splitter with one-input and eight-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between eight receiving GPS units. The MS18 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3 thru J9)...
Product Code: RMS18
Brand: GPS Source
The RMS116 GPS/Galileo/GLONASS Splitter is a 1-input 16-output rack mount RF device. The most common use being the input from an active GPS roof antenna or GPS simulator is split to sixteen receiving GPS units or timing boards.
Product Code: METRO-G-RK
Brand: GPS Source
The METRO-G-RK is a complete GNSS amplifier system that includes: METRO-G, GNSS active antenna, GNSS passive antenna, swivel mount, pole mount, surge suppressor and cabling. The METRO-G is a GNSS smart amplifier, perfect for the commercial and public sector. When used in conjunction with an active GPS/GLONASS receive antenna, it will pass GPS+GLONASS signals inside a building, hangar or any...
Product Code: MA11M
Brand: GPS Source
The MA11M is a military grade device used to strengthen the signal and reach of a GPS device. It is most appropriate in situations where there is a weak signal. The device is designed to work with an external, active antenna and is primarily for use by military applications (both Ground and Air) around the world. The amplifier sits in the path from the antenna to the receiver and is intended to...
