|
Step Global |
|---|
GNSS and GPS splitters facilitate the distribution of GPS signals to multiple receivers for enhanced navigation, tracking, and timing synchronisation. From optimising network performance to improving location-based services, GPS splitters offer a range of benefits making them indispensable in modern business operations.
GNSS and GPS splitters feature multiple output ports, Step Global provides a range of splitters with outputs ranging from 2 – 32. Splitters commonly amplify the split signal in order to compensate for any signal losses or degradation that may have occurred during the process but this is not always required.
If you have any questions on how to meet your signal requirements, you can get in contact with an expert here:
Product Code: S14
Brand: GPS Source
A GPS splitter allows a single GPS antenna to be shared between multiple GPS receivers. The S14 GPS, Galileo, GLONASS Splitter is a one input four output RF device. The S14 is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units. This splitter...
Product Code: S14GT
Brand: GPS Source
Designed for all GNSS frequencies, the S14GT makes it possible to use a single GPS referencing antenna and cable arrangement for multiple synchronization systems. The S14GT features an antenna DC bias select circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to power the antenna while other inputs will be...
Product Code: S14WI
Brand: GPS Source
The S14WI is designed to be ruggedized. It can be be configured to monitor the GPS antenna current, providing an alarm indication if the antenna is not operating according to specifications. The S14WI features a standard antenna DC bias Pick-and-Choose circuit. This allows for the active antenna DC input to be applied to any or all RF outputs. With this feature, one DC voltage will be chosen to...
Product Code: MS14
Brand: GPS Source
This is a military qualified MS14 GPS splitter with one-input and four-outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between four receiving GPS units. The MS14 can be configured to pass DC from an RF output (J2) to the antenna input port (J1) in order to power an active GPS antenna on that port. The remaining RF outputs (J3, J4, and J5)...
Product Code: S14S
Brand: GPS Source
The S14S is a slimline version of our bestselling S14. GPS, Galileo, and GLONASS will all pass. The splitter is a one input four output RF device. This slimline splitter is available with more options than any comparable product available. The most common application is the input from an active GPS roof antenna or GPS simulator is equally split to four receiving GPS units.
Product Code: G-SP4/AN-DCI-6
Brand: Global Invacom
The Global Professional GPS ACTIVE 4 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers. The unit is configured to insert 5V DC to the antenna port via a DC regulator. Both output ports incorporate a 200 Ohm DC load to simulate an antenna DC Current draw. DC is blocked to both output ports.
Product Code: L-SP4/AN-DC1
Brand: Global Invacom
The Global Professional L BAND ACTIVE 4 way Splitter has been designed to split the L band from a typical satellite system with negligible insertion loss. Port one will allow DC to pass through from receiver through to the combined input port. All other ports are DC blocked.The unit can be powered via port one or alternatively external powering is available. PSU’s are available if...
Product Code: L-SPCO4/PN-DC1
Brand: Global Invacom
The Global Professional L BAND PASSIVE 4 way Combiner/Splitter has been designed to combine or split the L band from a typical satellite system. The unit can be used in either configuration as splitter or combiner. Port one will allow DC to pass through from receiver port one through to the combined output port. All other ports are DC blocked. L-Band Splitters can also be supplied as rack mount...
