|
Step Global |
|---|
GNSS and GPS splitters facilitate the distribution of GPS signals to multiple receivers for enhanced navigation, tracking, and timing synchronisation. From optimising network performance to improving location-based services, GPS splitters offer a range of benefits making them indispensable in modern business operations.
GNSS and GPS splitters feature multiple output ports, Step Global provides a range of splitters with outputs ranging from 2 – 32. Splitters commonly amplify the split signal in order to compensate for any signal losses or degradation that may have occurred during the process but this is not always required.
If you have any questions on how to meet your signal requirements, you can get in contact with an expert here:
Product Code: S12S
Brand: GPS Source
The S12S GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12
Brand: GPS Source
The S12 GPS Splitter is a one-input, two-output GPS device. This product typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units. In this scenario, the S12 can be configured to pass DC from an RF output (J1) to the antenna input port in order to power an active GPS antenna on that port. The second RF output would feature a 200...
Product Code: S12T
Brand: GPS Source
A tiny splitter that still delivers full-size performance, the S12T is perfect for unmanned aerial vehicles (UAVs). With a rugged metal enclosure, it has been designed for long-term durability. The S12T will allow the power from one GPS antenna to be split between two GPS/GNSS devices. It can be used with any existing antenna and cable such as GPS Source's RG316, a common aircraft rated cable...
Product Code: MS12
Brand: GPS Source
This is a military qualified GPS splitter with one-input and two outputs. It typically finds application where an input from an active GPS roof antenna is split evenly between two receiving GPS units.The MS12 can be configured to pass DC from an RF output (J2) to the antenna input port in order to power an active GPS antenna on that port. The remaining RF output would feature a 200 Ohm DC load...
Product Code: G-SP2/AN-DCI-5
Brand: Global Invacom
The Global Professional GPS ACTIVE 2 way Splitter has been designed to allow the signal from a GPS antenna to be shared between two receivers. The unit is configured to insert 5V DC to the antenna port via a DC regulator. Both output ports incorporate a 200 Ohm DC load to simulate an antenna DC Current draw. DC is blocked to both output ports.
Product Code: L-SP2/AN-DC1
Brand: Global Invacom
The Global Professional L BAND ACTIVE 2 way Splitter has been designed to split the L band from a typical satellite system with negligible insertion loss. Port one will allow DC to pass through from receiver through to the combined input port. The other port is DC blocked. The unit can be powered via port one or alternatively external powering is available. PSU’s are available if required.
Product Code: L-SPCO2/PN-DCA
Brand: Global Invacom
The Global Professional L BAND PASSIVE 2 way Combin- er/Splitter has been designed to combine or split the L band from a typical satellite system. The unit can be used in either configuration as splitter or combiner. Both ports one and two will allow DC power to pass from the receiver through to the combined output port. L-Band Splitters can also be supplied as rack mount solutions in various...
