Dual Carrier MIMO Multi-Band Antenna- 9-Cables: 4x Sub-6 5G, 4x WiFi 6E, 1x GNSS

Dual Carrier MIMO Multi-Band Antenna- 9-Cables: 4x Sub-6 5G, 4x WiFi 6E, 1x GNSS

Product Code: LTMWG944


Brand: Mobile Mark

The Mobile Mark LTMWG944 antenna is a 9-cable antenna which covers sub-six and is also 5G ready with backwards compatibility for 4G LTE.

Its configuration is: 

  • 4 x Sub-6 5G 
  • 4 x Wi-Fi 6E 
  • 1 x GNSS

The LTMWG944 contains four cellular elements, four Wi-Fi elements and one GNSS element. This makes it suitable for dual-carrier modems.

In this antenna, there are two pairs of LTE MIMO elements, one for each carrier. These fleet management systems offer cellular carrier backup. The four Wi-Fi elements provide faster throughput for advanced Wi-Fi processors.

Mobile Mark’s LTMWG9 covers all global cellular & LTE frequencies and is also private LTE and 5G ready.

The LTE elements cover the frequencies of 617-960 MHz & 1710-7200 MHz.

The Wi-Fi elements cover frequencies of 2.4-2.5 GHz and 4.9-7.2 GHz.

It is a low-profile antenna that occupies less space than using multiple antennas. The LTMWG944 has a diameter of 5.5” (140mm) and height of 2.38” (60.44mm). It is one of the smallest antennas in the industry. When mounted properly, this antenna is rated to IP67 for water ingress. 

This antenna features colour-coded cable types for easy match-up, and 14ft cable jumpers are provided.  

The LTMWG944 is commonly seen in antenna applications across vehicle fleet management, public transportation, fixed site private networks, Wi-Fi data transfer and advanced multiband routers. 

This antenna is also available with fewer Wi-Fi elements:

  • LTMWG943: 4x5G, 3xWiFi, 1xGNSS
  • LTMWG942: 4x5G, 2xWiFi, 1xGNSS
  • LTMWG941: 4x5G, 1xWiFi, 1xGNSS
  • LTMWG940: 4x5G, 1xGNSS

Step Global are the leading authorised distributor of Mobile Mark antennas across Australasia. Contact our team today on +61 3 9551 7334 or sales@stepglobal.com to discuss your requirements. You can also browse our wide range of antennas here. 

Electrical Specifications 

 
Frequency & Gain 

5G/LTE Cables

1-4

617-960 MHz, 2 dBi 

1710 - 7200 MHz, 5dBi  

 

Wi-Fi Cables 

5-8

2.4 - 2.5 & 4.9  - 7.2 GHz, 5 dBi 
  GNSS Cable 9  1561, 1575 & 1602 MHz, LNA 26 dB, 5 dBi (RHCP)
VSWR 5G/LTE  < 2:5:1 VSWR Over Range (with 12" LMR-100)
  Wi-Fi 6E  < 2:1 VSWR Over Range (with 12" LMR-100) 
Impedence  50 Ohm Nominal   
Power Rating  10 Watts   
GNSS  Amplifier Bias Voltage  2.7 to 5 VDC 
  Gain  26 dB +/- 3 dB 
  Current  20 mA max, 10 mA typical

 

Mechanical Specifications 

Radome Material & Color  ASA UV-Inhibitive Plastic, Available in Black or White   
Radome Dimension  5.50" (139mm) in Diameter & 2.38" (60mm) in Height   
1ft (304.8mm ) Pigtail Cables & Connectors Exiting Antenna 5G/LTE  LMR-100 with SMA Plugs 
LTE-A (Green) & LTE-B (Red)
  Wi-Fi 6E  LMR-100 with SMA Plugs (Blue)
  GNSS RG-174 with SMA Plug (Yellow)
Including 14ft (4.26 m) Jumper Cables & Connectors  5G/LTE  LL-195 with SMA Jack & SMA Plugs 
LTE-A (Green) & LTE-B (Red)
  Wi-Fi 6E  LL-195 with SMA Jack & Rev Pol SMA Plugs (Blue) 
  GNSS  RG-174 with SMA Jack & SMA Plug (Yellow) 
Operating Temperature  -40° to +80°C   
Mounting 

7/8" (22mm) Dia. Feed Through 
3/4" (19mm) Ig. Thread for up to 
1/2" (13mm) Thick Surface 

 
Shock & Vibration 

IEEE-1478, EN 61373, MIL810G, TIA 329.2-C 

 
Water Ingress 

IP67 (When Properly Mounted) 

 
ROHS Compliant 

Yes

 

 

Constellations GPS, GLONASS, GALILEO, Beidou, QZSS
Bands Sub-6 5G Cellular/WiFi 6E
Frequency 617-960 MHz, 1710-7200 MHz, 2.4-2.5 & 4.9-7.125 GHz, 1561, 1575, & 1602 MHz
Gain 5 dBi, 5 dBi, 26 dB
Mounting Surface Mount
Cables 4 x Sub 6 5G, 4 x WiFi 6E, 1 x GNSS