Mobile Mark LTMG508 Multiband  Antenna 5 Cable: 2 x LTE, 2 x WiFi, 1 x GNSS

Mobile Mark LTMG508 Multiband Antenna 5 Cable: 2 x LTE, 2 x WiFi, 1 x GNSS

Product Code: LTMG508


Brand: Mobile Mark

The Mobile Mark LTMG508 antenna is a 5-cable antenna which covers Global 5G LTE, WiFi and GNSS. 

Its configuration is: 

  • 2 x Global LTE elements
  • 2 x WiFi elements
  • 1 x GNSS element

The LTMG508 is a MIMO (multiple-input-multiple-output) antenna which provides coverage for both cellular and WiFi.

Frequency & Gain: 

  • LTE: 914 - 960 MHz, 3dBi & 1710 - 6000 MHz, 4 dBi
  • WiFi: 2.4 - 2.5 GHz & 4.9 - 6.0GHz, 5 dBi 
  • GNSS: 1561, 1575 & 1602 MHz, LNA 26 dB, 5dBi 

GNSS operates on GPS, Galileo, Glonass, QZSS or Beidou. 

The Global LTE 5G-ready antenna element covers all cellular bands worldwide. In the US, this includes the new CBRS (Citizens Broadband Radio Service) at 3.55-3.7 GHz and Band 71 at 617-698 MHz.

It is a low-profile antenna, and one of the smallest in the industry. It's a much more convenient and It has a diameter of 5.5" (140mm) and a low profile of 2.38" (60.4mm). It takes up significantly less space than if you were using multiple antennas. 

This antenna is commonly seen used across vehicle fleet management, WiFi data transfer, multiband modems and public transportation.

The antenna is available in either surface-mount or mag-mount models. Specify MLTMG508 for the mag-mount model of the LTMG508 (2x Global 5G LTE, 2x WiFi, GNSS).


Step Global are the leading authorised distributor of Mobile Mark antennas across Australasia. Contact our team today on +61 3 9551 7334 or sales@stepglobal.com to discuss your requirements. You can also browse our wide range of antennas here. 

Electrical Specifications 

   
Frequency & Gain LTE Cables
1 & 2
617 - 960 MHz, 3 dBi
1710 - 6000 MHz, 4 dBi
  WiFi Cables
3 & 4
2.4 - 2.5 & 4.9 - 6.0 GHz,
5 dBi
  GNSS
Cable 5
1561, 1575, & 1602 MHz,
LNA 26 dB, 5 dBi
VSWR 617 - 960 < 2.2 MAX, < 2:1 TYP
  1710 - 6000 < 2:1
Impedance  50 Ohm Nominal  
Power Rating 10 Watts  
GNSS Amplifier Gain 16 dB
  Amplifier Bias
Voltage
3 to 5 VDC
  Noise Figure 2.0 dB max, 1.5 dB typical
  Current 20 mA max, 10 mA typical

 

Mechanical Specifications 

 
Radome Material & Colour ASA UV-Inhibitive Plastic,
Available in Black or White
Radome Dimension 5.5” ( 13.9 cm ) in Diameter
2.38” ( 6.0 cm ) in Height
Standard
Connectors ( MALE )
SMA Plugs for LTE & GNSS,
Rev Pol SMA Plugs for WiFi
Cables 1 - 4 Separate LL-195, 15 ft ( 4.5m )
GNSS Cable 5 RG-174, 15 ft ( 4.5 m )
Operating Temperature -40° to +80° C
Mounting 7/8” ( 22.2 mm ) Dia. Feed Through
3/4” ( 19 mm ) Long Thread for Up to
1/2” ( 12.7 mm ) Thick Surface
Shock & Vibration IEEE1478, EN61373, MIL-810G, TIA 329.2-C
Water Ingress IPX7 When Properly Mounted
Constellations GPS, GLONASS, GALILEO, Beidou, QZSS
Bands 5G LTE/GNSS/WiFi
Frequency 617-960 MHz & 1710-6000 MHz, 2.4-2.5 & 4.9-6.0 GHz, 1561, 1575, & 1602 MHz
Gain 4 dBi, 5 dBi, 26 dB
Mounting Surface Mount
Cables 2 x LTE/5G, 2 x WiFi, 1 x GNSS