Step Global Home
Step Global and CalAmp

Step Global can supply and develop a range of solution utilising the latest technology from CalAmp. .......
Our solutions cover ....

Telematics solutions

Motor Vehicles

  • Track and Trace (A)

  • Using CalAmp LMU-330, LMU-720/820/1220 and the LMU-2030/3030 the range of functionalities that can be configured include:
    • Report vehicle speed, time and location
    • Detect motion for device wake up and tilt
    • LMU-2030/3030 also can detect, capture and report on hard braking, cornering, acceleration and collision
    • Over-The-Air configuration & firmware updates
    • Internal "Rules Engine" that allows customisation of reporting based upon the vehicle environment and behaviour
    • Reporting triggers related to ignition, time, date, motion, location, direction, geo-zone, input and other event combinations
    • Configurable reporting periods to control mobile phone data bandwidth usage
    • If mobile phone connection lost then logs data for up to 20,000 reports
    • Battery backup for tamper reporting
    • Sleep modes for when vehicle is inactive for long periods
    • Internal Geo-Fences
  • Track & Trace with Vehicle Diagnostics (B)

  • Using the CalAmp LMU-3030 the range of functionalities that can be configured include:
    • The LMU-3030 is able to decode the CANBus data via the user OBDII port from vehicles in Australia manufactured from 2006 on
    • All of the functionality in (A) above is maintained but now specific vehicle data can also be reported on
    • Provides Vehicle Data (full availability will depend on vehicle make & model):
    • Vehicle Speed
    • Engine Speed
    • Throttle Position
    • Fuel Level Percentage
    • Engine Coolant Temp
    • Battery Voltage
    • Derived Engine State
    • Monitors
    • MIL Status
    • DTCs (and DTC Count)
    • Fuel Level Volume
    • Service Interval Distance
    • Service Interval Days Remaining
    • Odometer
  • Track & Trace with Driver ID, Speed Alerts, Business/Private usage (C)

  • Using the CalAmp LMU-2630/30 the range of functionalities that can be configured include:
    • The same for Track and Trace (above) but with the following additions:
    • Identification of Driver
    • Buzzer to alert driver when their speed goes over set thresholds
    • Switch for driver to set vehicle to private use
    • Can allow for starter disable on the vehicle for unauthorised drivers
    • Duress switch
    • Serial connection to peripheral devices with pass thru mode
    • Full driver behaviour capture
  • Track & Trace with Vehicle Diagnostics and I/O (D)

    • Combines all the functionality of B and C above


Heavy Goods

  • Track and Trace (E)

  • Using the CalAmp LMU-2630/30 (for Internal Mounting) and the TTU-3640 (IP66 for External Mounting) the range of functionalities that can be configured include:
    • Same as A above
  • Track & Trace with Vehicle Diagnostics (F)

  • Using the CalAmp LMU-4230 with J1939 or LMU-3640 for internal Mounting and the TTU-3640 for external mounting, OR the LMU-4220 with hard wired to sensors the range of functionalities that can be configured include:
    • Same as (B) above but with full J1939 diagnostics
    • For those vehicles that do not comply to J1939 standard it is required to hard wire to engine sensors, this requires signal conditioning circuitry to be added to the LMU. There is a limit to the engine data that can be obtained using dedicated sensors
  • Add Driver ID, Speed Alerts (G)
    • These are simple add-ons to all the devices in (E) & (F), the range of functionalities that can be configured include:
    • As in (E) or (F) above but with the following additions:
    • Identification of Driver
    • Buzzer to alert driver when their speed goes over set thresholds
    • Can allow for starter disable on the vehicle for unauthorised drivers
  • Add In-Vehicle Mobile Data Terminal (H)

  • MDT-7 connected to Bluetooth enabled LMU's (2630 & 4230), the range of functionalities that can be configured include:
    • 7" Touchscreen Display
    • Ruggedized shock-absorbing silicon case
    • Tethered vehicle dock
    • AndroidTM OS (Jelly Bean)
    • 1 GB DDR3 RAM with Micro SD
    • Card Slot - 802.11 b/g/n WiFi
    • Bluetooth 2.1 + EDR


Vehicles Requiring Wireless Networking

  • Full Track and Trace, Vehicle Diagnostics, WiFi, BLE, Ethernet
  • Using the CalAmp LMU-5530 with the following requirements:
    Funcionality:
    • Linux OpenWrt
    • Secure IP router
    • Bluetooth 4.0 Dual Mode
    • 11 b/g/n/I Wi-Fi
    • 10/100 Ethernet
    • USB Host + OTG
    • Switched power serial ports
    • Comprehensive I/O
    • I/F for either OBDII or J1939
    • All the features of (A) thru (H)
    • Supports advanced peripherals such as laptops, USB dongles, MDT's, RFID readers, weigh systems, Video storage and streaming
    • Hosted applications on Linux


Powered Machines (Light Towers, Mowers, Street Sweepers etc.)

  • Track and Trace (E)

  • Using the CalAmp TTU-2830/40 the range of functionalities that can be configured include:
    • Same as A Simple Track & Trace for Vehicles
    • Rugged IP67 enclosure
    • Battery backup for up to 3 months without external power
    • Does have a number of I/O so can also monitor or even control switching on/off of some assets


Non Powered (Trailers etc.)

  • Track and Trace
  • Using the CalAmp ATU-620 the range of functionalities that can be configured include:
    • Totally self-contained
    • Rugged IP67 Enclosure
    • AA Batteries only
    • Self powered for up to a year
    • Low Battery warning
    • Reporting triggers related to time, date, motion, location, direction, geo-zone, and other event combinations


Remote Area Operations

Using Iridium Satellite Comms when no mobile phone coverage available
  • Using the Step Global SGIR and the CalAmp LMU's 4220/30 and LMU-5530 the range of functionalities that can be configured include:
  • When outside mobile phone coverage then will send messages via the Iridium network
  • Provides global reporting coverage
  • Alternative message triggers when in Iridium mode to reduce air-time costs

 


Explore the links below to find out more on the Step Global + CalAmp range of products and services and how your business can benefit.